APPLICATIONS:

SAUNA control
STEAM BATH control
SPA control
HEATERS and CHILLERS
TIMED Heating or Cooling
Other media Temperature
Heat /Cool process control
SPECIFICATIONS:

Supply:

Timer Preset range:
Timer accuracy:
Temp. control range:

Temp. Accuracy/units:
Control mode:
Display:

Load output 1:
Load output 2:
Load output 3:
Load output 4:
Alarm buzzer:

Probe wiring:
Error detection:
120Vac, 208-240Vac or 12/24Vac/dc, 50/60Hz  ( specify model )

Any range 0 to 255 min, DOWN counting ( custom timing available )
Power line frequency (50 or 60 Hz) or internal crystal 30 ppm
0 to 255F (or -17C to 140C) standard or depending upon temp. probe ordered (lower or high temperature ranges available upon request )
+/- 1F (0.5C) Celsius or Fahrenheit (selectable)
ON/OFF or Proportional ( custom control models )
2 x 3 digits, 7 segment, Super Bright LED 
RED  GREEN or  BLUE  ( 0.56"  LED display digits )

SPST relay, 30 Amp, 250Vac (or custom)
SPST relay, 30 Amp, 250Vac (or custom)
OPTIONAL, SPST relay, 10 Amp, 250Vac (or custom)
OPTIONAL, SPST relay, 10 Amp, 250Vac (or custom)
OPTIONAL, piezo, 85dB internal

Up to 500 feet  ( 150m ) away from controller  ( any type wire )
Automatic with error display and protection
DESCRIPTION:
Electronic, digital controller designed for Heating or Cooling.
This controller has an internal, programmable (interval) timer.
When the timer starts the internal thermostat will control the output high power relays ( 1 or 2 relays on-board  rated at up to 30Amp or 40Amp each ). When wired to a Heater or another load like a Fan or a Pump, they will control the temperature.
The temperature and the timer are preset by pressing the corresponding keys on the control panel.
One digital display shows both, the preset and the current temperature and the other shows the preset time and the current count down.
The output relays contacts are isolated for wiring to any low or high voltage source.

Other Features:
The probe may be wired up to 500 ft. ( 150 meters ) away from the controller with standard 2-conductor wire.
Quiet, Arc-Free switching of high power load.
The load output may be manually turned OFF and the temperature preset may be changed at any time.
The timer may be manually reset.
Optional Additional relay (for  light, fan ) may ba activated by pressing a pushbutton on the control panel...
Additional relay(s) may be activated automatically by the internal program at a customized option.

The timer can count in seconds, minutes or hours depending upon the model.
The temperature units are Celsius or Fahrenheit as selected by an on-board jumper.
DIMENSIONS:

Face:  Metal  with Lexan decal.
Body: ( W x H x D )
5-3/8" x 2.75" x 2"
136mm x 70mm x 51mm
INSTALLATION in Box or Wall ( Panel  ):

Designed to fit in a 3-Gang
electrical box or in a panel.
Face plate will sit semi- flush with the wall.
Example of Popular models:

SD-3PB-I-2HP-120-56-SN


SD-3PB-I-2HP-120-56-IR
Dry Sauna Timer + Thermostat. 5-60Minutes, 100-194 F (37-90 C)  preset range,
2 High Power relays (30 Amp each)

INFRA RED Sauna Timer + Thermostat. 5-60 Minutes, 40-131 F  (5-55 C)  preset range,
2 High Power relays (30 Amp each)
SELECTION of standard Temperature Probes :
TYPICAL WIRING EXAMPLES  ( for more click on the images below )
COMPLETE NUMBERING SYSTEM FOR SD series CONTROLLERS :
( click below to download PDF document )
30 Amp max., plus Light control
2 AC / DC Motors, 2 x 30 Amp max.
60 Amp max. ( in 2 banks )
60 Amp max. ( in 2 banks ),
plus Light & Fan or Radio/CD control
series  SD-3PB   TIMER + THERMOSTAT ( in one unit )
with external temperature sensor. Output load up to 60 Amp / 250Vac.
Optional DUAL control Panel  ( Main and Remote )
.

with 6, 7 or 8 PUSHBUTTONS :

1. TIMER ON/OFF
2. TIME UP
3. TIME DOWN
4. TEMP. UP
5. TEMP. DOWN
6.  FAN or  USER PRESET ( or other custom option with relay contact )
7.  LIGHT  ON / OFF   ( or other custom option with relay contact )
8.  RADIO / CD  ON / OFF   ( or other custom option with relay contact )
LED DISPLAY
AVAILABLE
IN ALL COLORS
Face color AVAILABLE
in  Grey or Black
INSTALLATION EXAMPLES
Typical contents of a standard SD-3PB  set with Main and SDR-3PB Remote Panel
Each face plate may be ordered as either Flush or Semi-Flush
SD-3PB  Main and SDR-3PB Optional Remote Panel connected together.
Flush  Main Panel installation in the wall
Semi-Flush  Main Panel installation in the wall
NA7100KB4100BLK


NA7100KB4100CHR


NA7100KB4100RDT



NA7100KB4100SQT


NA7100KB4100DPD


NA7100KB4100SHD



PT1000TC38550MM




NA7100KB4100PIPTR
OPTIONAL Plastic or Metal (SS)
Sensor Probe Plate
(model PPP4 or PPS4 ).
OPTIONAL:
Sensor Probe Guard
model PG5 (black or grey ) .
OPTIONAL REMOTE PANEL
OPTIONAL REMOTE PANEL
NOTE:  CUSTOM MODIFICATIONS AVAILABLE FOR ALL MODELS
Thermowell model:
SSTW-114-066-050NPT
Stainless Steel
Stem = 4-1/2"
Bore = 0.26"
1/2 NPT thread
Stainless Steel
Stem = 4-1/2"
Bore = 0.26"
3/4 NPT thread
Thermowell model:
SSTW-114-066-075NPT
Thermowell model:
SSTW-41-066-050NPT
Thermowell model:
SSTW-64-066-050NPT
Stainless Steel
Stem = 1-5/8"
Bore = 0.26"
1/2 NPT thread
Stainless Steel
Stem = 2-1/2"
Bore = 0.26"
1/2 NPT thread
Thermowell model:  BTW-100-05-075NPT
Brass, Stem = 4" , Bore = 0.2", 3/4 NPT thread
Thermowell model:  BTW-25-05-075NPT
Brass, Stem = 1" , Bore = 0.2", 3/4 NPT thread
Thermowell model:  BTW-25-05-025NPT
Brass, Stem = 1" , Bore = 0.2", 1/4 NPT thread
Toll Free:  1- 866- 829- 4253
CUSTOM TEMPERATURE RANGES PER REQUEST
TEMPERATURE PROBE WIRING EXTENDABLE
UP TO 500 FEET ( 150m ).
E-mail:  info@keracontrols.com
E-mail:  info@keracontrols.com
KERA Technologies Inc.    Toll Free:  1-866-829-4253
SDX-3PB
SDX-3PB
SDR-3PB
SDR-3PB
SDR-3PB
SDR-3PB
SD-3PB
SD-3PB